198cm straight griffin LH-30-200-HT-C ATX® High Tensile Pro Bar
Delivery within Poland
Delivery within the European Union
STRAIGHT GRIFFIN SMOOTH | HIGH TENSILE PRO BAR | ATX®
model: LH-30-200-HT-C
The198cm straight barbell LH-30-200-HT-C ATX® High Tensile Pro Bar is a specialized strength training device. It is characterized by high permissible load and unprecedented high resilience.
The feature of the LH-30-200-HT-C griffin is the permissible load of 700 kg with a tensile strength of 190,000 PSI.
The griffin is equipped with urethane bumpers that separate the working part (for loads) from the gripping part (for hands). The urethane bumpers are immovable and inseparable from the griffin. In addition, the bumpers protect the griffin from damage. They protect the griffin when it is put down or accidentally dropped.
The griffin is deformed to a value that limits its elasticity, and then resiliently returns to its initial state without permanent deformation.
The tensile strength is 190,000 PSI.
The allowable load is 700 kg.
Material: | resilient solid steel conforming to EN 10277-5. Chrome-molybdenum-silicon-manganese alloy |
Maximum load: | 700 kg (detailed information on limitations - below) |
Weight: | 11 kg |
Overall length: | 1980 mm |
Length of the grip part: | 1280 mm |
Diameter of working part: | Ø30 mm Length of working part: 320 mm |
Diameter of the gripping part: | Ø30 mm |
Bumpers: | urethane permanently connected to the griffin |
Grip surface: | Precision finished surface subjected to a mottling process with a single grip length marker |
Center marker: | with center knurling |
Grip marker: | 910 mm |
Surface coating: | high quality chrome coating wear resistance hard chrome plating |
The exceptional properties of its resilience are due to the optimal combination of chromium, molybdenum, silicon, manganese.
ATX® griffin has the following values:
- tensile strength: 190,000 PSI
- surface hardness | HRC: 44.0
Fitness type training | |
Strength type training | |
Weightlifting | |
Power triathlon |
Permissible load of the griffin:
The specified maximum load capacity of the griffin is given for optimal training conditions. The user must be aware of the fact that the permissible load changes with the change of support points, which are marked in the schematic drawing. The relationship is directly proportional to the change in the distance of the support points between each other.
Attention !!!
Improper loading of the griffin can lead to its permanent damage, which is not subject to warranty and guarantee.
Permissible load depending on the application
Type of load transfer | Maximum load | Example exercises |
Wide grip | maximum load | 700 kg | bench press |
Medium grip | reduced load | 600 kg | deadlift |
Middle grip | minimum load | 500 kg | squats |
Specific References
- EAN13
- 4260485122789